44D-T23
Drum Truck
Suitable for 210 litre steel drums
Capacity 300kg
Standard 2 wheel design with rear bar support. Optional 4 wheel design with rear castors which helps the operator move and manoeuvre a loaded truck without having to bear any weight of the drum.
- Tubular and hollow section construction with centre beam adjustable drum retention hook
- Choice of solid or pneumatic wheels 250mm or 400mm diameter.
- These drum trucks are also available with rear supporting castors
- Finish powder coated
44D-T27
CODE
44D-T21
44D-T23
44D-T25
44D-D27
Wheel type
solid
Pneumatic
solid
Pneumatic
Wheel dia mm
250/400
250/400
250/400
250/400
Rear castors support
none
none
yes
yes
Rear castors size mm
-
-
2 x 125
2 x 125
Weight kg
34
21
36
23
44D-T60
Pallet loading Drum Trolley
Designed to assist loading and unloading of 210 ltr drums on to pallets or platforms etc with sliding drum retention clamp.
- Maximum pallet height 190mm for safe use.
- Wheels: 2 x 250mm diameter and 2 x 200mm diameter with roller bearings and solid rubber tyres.
- Twin loop handles
- Powder Coated finish Blue
Mauser and plastic drums can also be transported with the addition of an optional clamp
Code 44D-T61
CODE
44D-T60
H x L x W mm
1100 x 1660 x 610
Weight kg
29
Capacity kg
300
451-SDB
Universal Stainless Steel Drum Trolley
Using unique geometry, this innovative mechanism positions the wheels directly beneath the load. Whether you’re lifting a 50kg barrel or a 350kg drum, input force is always below 20kg, making this one of the safest drum trolleys on the market.
Fully adjustable rim catch
The trolley catch has a vertical height adjustment and a range of hook positions, allowing you to connect to drums from 50 to 205 litres. Simply remove the pin from the catch, adjust the position and replace the pin to fit your drum into the trolley. This rim catch can connect to many different drums, including L-ring and MAUSER plastic drums as well as your typical steel drums.
- Constructed from corrosion-resistant 304 stainless steel this trolley is ideally suited to exposed or harsh environments.
- When you move the trolley into the deployed position, the wheels slide beneath the drum. By positioning the centre of gravity directly over the wheels, the trolley gives you ultimate stability and control when transporting drums.
- Complies with EC Machinery Directive 2006/42/EC
CODE
441-SDB
Capacity kg
350
Drum type
Universal
Height mm
1320
Width mm
795
Chemical resistant Wheels Dia.mm
250
DT-300A
Hydraulic Drum Gripper
Capable of lifting a 210ltr steel drum from an upright position. This mobile drum truck can lift the drum up to a height of 805mm which is perfect for loading or unloading a drum into a van, onto a dolly or a pallet.
Capacity 300kg
Drum is raised by foot pump, while the lowering is controlled by turning a spring loaded hand wheel until the desired height is achieved.
- Spring loaded gripper securely holds any rimmed drum and automatically locks when lifting.
- O/A Dimensions L x W x H 952mm x 956mm x 1675mm
- Weight 72kg
- This truck is available with 65mm or 125mm mm diameter fork wheels, the smaller size would be used where there is restricted access under a machine or a spill pallet
Code DT-300A 2 x swivel braked 125mm + 2 x 125mm fixed on front
Code DT-300B 2 x swivel braked 65mm + 2 x 65mm fixed on front
TR-350
Circular Drum Dolly
Ideal for moving steel drums short distances around the workplace
- Capacity 350kg
- Flat steel braces with 4 off 75mm nylon swivel castors
- Flat Circular retention ring 610mm internal diameter
- Finished powder coated Blue
- Weight 9kg
Code TR-350
TS-400
Drum Stacker/Rotator
- Fully rotates drums through 360 deg.
- Operation is archived by rotating a hand wheel at the rear of the stacker
- Lifting Height: 1350mm
- Capacity: 400kg
- Overall length: 1325mm
- Overall height of stacker : 1960mm
- Width of stacker :806mm
- The drum lift operation is hydraulically operated by foot pump
Code TS-400
451-005
Poly Drum Truck
The original Poly-Dolly set the industry standard for a mobile dispensing station, with highly engineered features designed to enhance productivity. With a patented enclosed sump, ergonomic design, and rolled-grip handles for easy tipping, dispensing operations have never been easier.
The deep well holds a 25 ltr. pail for dispensing and liquid transfer, while the internal sump contains liquid and allows the dolly to still be transported in case of a spill.
- Transports and dispenses drums up to 210 ltr
- Fork-able and simple to load
- Enclosed sump allow for transport after a spill occurs
- Generous 300 ltr. spill capacity meets all regulations
- Ergonomic design allows just about anyone to use the dolly with ease
- Drain plug included to empty the sump
- Will not rust or corrode
- All Terrain Dolly available
- Regulations: EPA 40 CFR 264.175, SPCC, UFC and NPDES
CODE
441-005
Capacity kg
300
Spill capacity ltrs
300
L x W x H mm
1750 x 800 x 680
Weight kg
45