450-MT60
450-MT18
450-HM15
Furniture and load handling
600 kg capacity furniture moving set. (450-MT60)
Robust lifting mechanism designed for use with heavy and bulky items. Manual lift using spindle winch with safety strap(2 x 5 metre straps supplied) Set of two transport units safely operated by one person.
1800 kg capacity furniture moving set. (450-MT18)
For professional transport of heavy and bulky items. Hydraulic lifting mechanism. Steering handles for direction control supplied with 2 safety straps 5 metres long. Safely easy operated by one person.
400kg capacity corner skate set. (450-HM15)
These low level corner skates are designed to assist with the moving of awkward rectangular loads. pressed steel frame with 3 x 50mm grey non marking rubber castors fitted to each corner unit. Each corner unit has a capacity of 150kg and is fitted with rubber matting. It is important that the weight is evenly distributed on all four corners.
CODE
450-MT60
450-MT18
440-HM15
Capacity kg
600
1800
600
O/A Raised height mm
300
250
20
Wheel diameter mm
125
150
50
Wheel type
polyurethane
polyurethane
Rubber
Lifting function
manual
hydraulic
manual
Weight kg
25
86
8kg / 4 pieces
441-UTC
441-UTT
351-CMTS
441-HCS
Table and Chair handling
Upright chair truck Code 441-UCT
Designed to carry chairs of overall size 470 x 540 x 870 in the vertical position .Folded sheet steel and tubular design. Removable handles for ease of storage when not in use this trolley is supplied with retaining straps. finished powder coated Black
Hanging chair storage trolley Code 441-HCS
Shown in image loaded and unloaded this trolley is manufactured from box section and tube with protective plastic sheaths and end caps on hangers. Hanging rails have a length of 550mm and a centre to centre dimension of 330mm
Finish powder coated Black
Universal table trolley Code 441-UTT
Designed to carry either folded round tables or folded rectangular tables using MDF floor on each end of the trolley with a free space in the centre of the base to secure round tables. Removable retaining bars located on either end for easy of loading
Finish powder coated Black
Chair moving hand truck Code 351-CMTS
Designed to move stacking chairs with ease this hand truck will transport 12 - 15 chairs depending on chair stack ability. Available with either solid or pneumatic wheels.
Finish powder coated Grey
CODE
441-UCT
441-HCS
441-UTT
Castors / wheel type
100mm castors
100mm castors
100mm castors
O/A W x D x H mm unloaded
520 x 1530 x 1100
1135 x 1250 x 2025
850 x 1830 x 1260
Weight kg
29
62
42
351-CMTS
351-CMTP
200mm solid wheels
260mm pneumatic
1300 x 590 x 380
1300 x 590 x 420
12
13
440-P40
440-P35
440-P31
Panel Trolleys
Large Sheet Trolley Code 440-P31
Heavy duty angle trolley with tubular support frame for sheet material transport and storage fully welded throughout ply deck. 200mm diameter castors, 2 fixed and 2 swivel rubber tyre with steel centres.
Adjustable Sheet Trolley Code 440-P35 (extra support bar Code 440-PS8)
This trolley has 2 adjustable sheet support bars as standard which can be positioned in either of the six locations provided extra support bars are optional. Trolley is fitted with 2 fixed and 2 swivel rubber tyre castors 200mm diameter.
Panel Sheet Trolley Code 440-P40
Ideal for the movement of panels or sheets on sites or where access is an issue. The trolley weighs only 19kg which makes it ideal for deliveries. It has 2 fixed 200mm wheels and 2 handles which are positioned for ease of grip. The platform is fitted with a rubber mat to avoid any movement of the load during transport. This trolley is also available with 260mm pneumatic wheels where travel over rough ground is envisaged. Code for Pneumatic wheels 44P-P40
CODE
440-P31
440-P35
440-P40
Capacity kg
500
400
300
Overall height mm
1500
725
1200
O/A length of platform mm
2250
1200
500
O/A width of platform mm
700
800
200
Castor diameter mm
200
200
200
Castor layout
2 fixed / 2 swivel
2 fixed / 2 swivel
2 x fixed
Weight
48
75
19