Material Specifications
Platform base and frame of scissors: Made from stainless steel AISI 304, nickel chromium quality steel with excellent high corrosion resistance properties. Exceptionally well suited to the food and pharmaceutical industries.
Axles wheels and bolts: Made from stainless steel AISI 304, a ductile quality steel with good corrosion resistance.
Fittings and tubes: standard electro-galvanised quality
Wheels: Stainless steel / polyurethane
A choice of 3 different cylinders are available to suit various industrial applications.
Standard Cylinder : Hard chrome plated piston rod, Piston tube: 2 x primer and 2 x two component polyurethane paint.
Cylinder with special coating: Stainless steel AISI 304 quality piston rod and joint bed, piston tube: Sandblasted till SA2.5, zinc metallised to 290u, 2 x two component primer to 60u and 2 component polyurethane paint to 40u
Stainless steel cylinder: Stainless steel piston rod, hard chrome plated, Stainless steel AISI 304 quality joint bed and piston tube.
Stainless steel U profile scissor table
- Allows easy access with a pallet truck
- Positioned directly on a level floor
- No pit required
- Distance between legs 580mm
- CE marked and conform to EN 1570
This static electro-hydraulic "U" shape scissor table allows a Euro pallet to be placed on the platform by jacking up a pallet using a standard pallet truck, manoeuvring the pallet truck within the "U" section of the scissor table, releasing the pallet to rest on the platform then withdrawing the pallet truck. The pallet can then be raised to the required level. The opposite procedure is carried out to remove a pallet from the scissor table.
All low profile scissor tables have a remote power pack with a 2.5 m length hose between the table and the unit. The control box with a push button for up/down and the emergency stop is mounted on a unit with a 2 m cable. lift tables are equipped with a safety trip bar on all sides.
The table requires a 3-phase electrical supply.
These Stainless steel lift tables are most suitable for installation in the food and Pharmaceutical industries and areas where wet or corrosive environments create problems.
CODE
Lift height mm
Capacity kg
Platform length mm
Scissor table width mm
Closed height mm
Lift time sec.
Weight kg
45S-U10
800
650
1450
1085
85
12
235
45S-U20
800
2000
1500
1200
100
16
325
Stainless steel Super-low scissor table
Material Specifications
Platform base and frame of scissors: Made from stainless steel AISI 304, nickel chromium quality steel with excellent high corrosion resistance properties. Exceptionally well suited to the food and pharmaceutical industries.
Axles wheels and bolts: Made from stainless steel AISI 304, a ductile quality steel with good corrosion resistance.
Fittings and tubes: standard electro-galvanised quality
Wheels: Stainless steel / polyurethane
A choice of 3 different cylinders are available to suit various industrial applications.
Standard Cylinder : Hard chrome plated piston rod, Piston tube: 2 x primer and 2 x two component polyurethane paint.
Cylinder with special coating: Stainless steel AISI 304 quality piston rod and joint bed, piston tube: Sandblasted till SA2.5, zinc metallised to 290u, 2 x two component primer to 60u and 2 component polyurethane paint to 40u
Stainless steel cylinder: Stainless steel piston rod, hard chrome plated, Stainless steel AISI 304 quality joint bed and piston tube.
CODE
45S-L10
45S-L10F
45S-L15
45S-L15F
45S-L20
45S-L20F
Lift height mm
800
800
800
800
800
800
Capacity kg
650
650
1000
1000
2000
2000
Platform length mm
1500
1500
1500
1500
1500
1500
Platform width mm
800
1000
800
1000
800
1000
Closed height mm
85
85
85
85
100
100
Ramp size L x W mm
600 x 800
600 x 800
600 x 800
600 x 800
800 X 800
800 x 800
Lift speed to max height sec
12
12
15
15
16
16
Weight kg
260
275
300
320
340
360
These low profile ramp models are used when lifting a non Euro pallet as the cross slates under the pallet would prevent the pallet truck from being withdrawn which is not the case using the "U" shape type.
The pallet truck with the loaded pallet attached is pushed up the access ramp and released onto the scissor platform. The pallet truck is then withdrawn down the ramp allowing the scissor table to raise the pallet to the required level.
All low profile scissor tables have a separate power unit with a 2.5 m length hose between the table and the unit. The control box with a push button for up/down and the emergency stop is mounted on a unit with a 2 m cable. lift tables are equipped with a safety trip bar on all sides.
- Access to platform via Ramp
- Positioned directly on a level floor
- No pit required
- Various platform sizes are available
- All scissor tables are CE marked and conform to EU machine
directory and EN 1570
Single scissor Stainless Steel table
Material Specifications
Platform base and frame of scissors: Made from stainless steel AISI 304, nickel chromium quality steel with excellent high corrosion resistance properties. Exceptionally well suited to the food and pharmaceutical industries.
Axles wheels and bolts: Made from stainless steel AISI 304, a ductile quality steel with good corrosion resistance.
Fittings and tubes: standard electro-galvanised quality
Wheels: Stainless steel / polyurethane
A choice of 3 different cylinders are available to suit various industrial applications.
Standard Cylinder : Hard chrome plated piston rod, Piston tube: 2 x primer and 2 x two component polyurethane paint.
Cylinder with special coating: Stainless steel AISI 304 quality piston rod and joint bed, piston tube: Sandblasted till SA2.5, zinc metallised to 290u, 2 x two component primer to 60u and 2 component polyurethane paint to 40u
Stainless steel cylinder: Stainless steel piston rod, hard chrome plated, Stainless steel AISI 304 quality joint bed and piston tube.
CODE
45S-S50
45S-S10
45S-S10B
45S-S10F
45S-S20L
45S-S15
45S-S20F
45S-S15B
45S-S20S
45S-S20B
Capacity kg
500
850
850
850
2000
1500
2000
1500
2000
2000
Lifting Height mm
710
1010
1010
1010
1050
1330
1050
1330
1750
1750
Table size L x W mm
900 x 650
1300 x 650
1300 x 800
1300 x 1000
1300 x 800
1700 x 900
1300 x 1000
1700 x 1200
2200 x 1200
2200 x 1500
Lifting time sec
11
18
18
18
27
27
27
27
35
35
Closed height mm
160
180
180
180
230
230
230
230
250
250
Weight kg
115
160
175
180
240
315
250
365
580
650
Stationary Electric / Hydraulic Lift Tables are the backbone of many material handling applications. These types of lifts are used in both manual scenarios, to place products at an ergonomic height and improve efficiency of operators, as well as automated systems such as logistic conveying solutions. The majority of material handling applications require a capacity of 3000kg or less. As such, the construction and design of these lifts are targeted to fulfil that need. Standard lifts typically have a lowered height of around 160mm and are commonly loaded by forklift, walk behind stacker, conveyor or crane..
You will find in the table below some of the more common Stainless steel single static lift tables on offer. However there are many more in our extended range having capacities up to 10,000 kg and table sizes up to 5 x 3 meters for more information please contact our sales team
Most lifts can be supplied with various accessories in order to suit your specific needs e.g.:
Roller conveyors, Chain mesh / bellows protection, Turn tables, Tilt operation, Hand rails, gates and Loading bridges
Lift tables are also available in galvanized steel.
Eurolift also offer a nationwide installation service and service contracts to suit customer requirements. Talk to our sales team.
All tables are CE marked and are manufactured in accordance with current rules for lifting tables and conform to the EU machine directory and EN1570.
Double scissor stainless steel table
CODE
45S-D50
45S-D10
45S-D10F
45S-D20
45S-D10M
45S-D20M
Capacity kg
500
1000
1000
1000
1000
1500
Lift Height mm
1370
1370
1975
1975
2200
2200
Table size mm
900 x 650
900 x 650
1300 x 800
1300 x 1000
1500 x 900
1500 x 1200
Closed height mm
270
270
375
375
400
400
Lift speed mm/sec
61
61
53
53
53
37
Weight
140
175
310
340
450
495
Material Specifications
Platform base and frame of scissors: Made from stainless steel AISI 304, nickel chromium quality steel with excellent high corrosion resistance properties. Exceptionally well suited to the food and pharmaceutical industries.
Axles wheels and bolts: Made from stainless steel AISI 304, a ductile quality steel with good corrosion resistance.
Fittings and tubes: standard electro-galvanised quality
Wheels: Stainless steel / polyurethane
A choice of 3 different cylinders are available to suit various industrial applications.
Standard Cylinder : Hard chrome plated piston rod, Piston tube: 2 x primer and 2 x two component polyurethane paint.
Cylinder with special coating: Stainless steel AISI 304 quality piston rod and joint bed, piston tube: Sandblasted till SA2.5, zinc metallised to 290u, 2 x two component primer to 60u and 2 component polyurethane paint to 40u
Stainless steel cylinder: Stainless steel piston rod, hard chrome plated, Stainless steel AISI 304 quality joint bed and piston tube.
Double scissor tables are chosen where greater travel of the table is required or where the ratio between the lift height and the table size is to be kept to a minimum.
The majority of material handling applications require a capacity of 3000kg or less. As such, the construction and design of these lifts are targeted to fulfil that need. Standard lifts typically have a lowered height of around 400mm and are commonly loaded by forklift, walk behind stacker, conveyor or crane.
These tables can also used as a goods lift between floors, supplied with a goods lift control system which allows operators to call and load the lift in safety.
You will find in the table below some of the more common Stainless steel double static lift tables on offer. However there are many more in our extended range having capacities up to 6,000 kg and table sizes up to 4 x 2.5 meters for more information please contact our sales team
Most lifts can be supplied with various accessories in order to suit your specific needs e.g.: Roller conveyors, Chain mesh / bellows protection, Turn tables, Tilt operation, Hand rails, gates and Loading bridges
Lift tables are also available in galvanized steel.
Eurolift also offer a nationwide installation service and service contracts to suit customer requirements. Talk to our sales team.
All tables are CE marked. They are manufactured in accordance with current rules for lifting tables and conform to the EU machine directory and EN1570