Cantilever construction:

Fully welded steel with 50mm x 25mm cross members and formed 1.5mm steel back. side and footrest panels. Standard workbench height  840mm, frame finished light  grey powder coating.

4 Leg Frame design:

Fully welded steel with 32mm x 32mm legs, 50mm x 25mm and50mm x 25mm cross members. Standard workbench height  840mm frame finished light grey powder coated

Both designs can be supplied with either MDF or a grey Laminate worktops, the workbenches are available in 3 lengths and in a choice of 3 depths.

Adjustable feet for floor levelling is standard.

Strong fully welded steel construction make these workbenches suitable for the toughest of applications. Manufactured from heavy duty 40mm x 40mm steel angle with a choice of MDF  or  sheet steel worktops.

This range of benches can also be fitted with various combinations of cupboards and drawers as can be seen in the images.

If ordering the steel worktop a retaining skirt can be factory fitted to cover either the rear of the top or rear and sides depending on requirements please ask or sales team when ordering.

The Bench Accessories for this range can be selected from table below and can be fitted on the RHS as standard or LHS on request.

Extra strong fully welded steel construction make these workbenches suitable for the toughest of applications. Manufactured from heavy duty 50mm x 50mm steel angle with a choice of MDF  or  sheet steel worktops.

This range of benches can also be fitted with various combinations of cupboards and drawers as can be seen in the images.

If ordering the steel worktop a retaining skirt can be factory fitted to cover either the rear of the top or rear and sides depending on requirements please ask or sales team when ordering.

The Bench Accessories for this range can be selected from table below and can be fitted on the RHS as standard or LHS on request.

This budget workbench is assembles using long span  shelving as can be seen in our Shelving and Racking Section.

Available in depths of 600mm,900mm and 1200mm  and lengths of  950mm,1200mm, 1400mm and 1900mm

The image shown has 2 shelves one which is the work area,  this is the minimum amount of shelves required for stability, however you can add further levels in between to suit your needs such as packing materials , tools etc.

Eurolift can also supply a framework  to hold rolls of cardboard or bubble wrap which can be mounted either in between the shelves or above the worktop which customises the bench for use as a packaging station.

• The work height of  the bench can be determined when ordering, the standard being 1000mm
• Uprights are blue and  the beams orange
• Worktops recess into the beams and come in a choice of  MDF, high density chipboard or Laminate the standard thickness 22mm